• Training date expired

FS Eng (TÜV Rheinland) SIS

Event Location Brasschaat - Belgium
Spoken language Dutch
Date 19 - 22 October 2020

Training date expired!

Training results:


TinoVC is an accepted course provider within the Functional Safety Program for Safety Instrumented Systems (SIS) of TÜV Rheinland. The course focuses on functional safety aspects for the process, oil & gas, petro-chemical and chemical industries according to IEC 61508 / 61511.

Course objective

The main objective is to provide all engineers involved in safety instrumented systems with elementary and necessary knowledge about functional safety, based on the leading international functional safety standards IEC 61508 and IEC 61511. A second objective is to give anybody attending the course the opportunity to have his or her functional safety competency confirmed by the TÜV Rheinland upon successfully passing the exam.

Who should attend?

  • System integrators and independent consultants
  • Control and process engineers
  • Maintenance and instrumentation engineers
  • Managers of engineering departments
  • Risk, reliability, safety and quality engineers
  • Loss prevention engineers
  • Sales engineers - Sales managers - Marketing specialists for safety-products, systems and services
  • Technical staff involved in any part of SIS lifecycle that need or want to develop their competency in Functional Safety

Why should you attend?

IEC61511 ed2.0 released in February 2016, clearly indicates as a ‘Normative’ requirement:

  • That anybody involved in safety lifecycle activities SHALL be competent to carry out the activities for which they are accountable. 
  • That a procedure SHALL be in place to manage competence of all those involved in the SIS life cycle.
  • That a periodic assessments SHALL be carried out to document the competence of individuals against the activities they are performing and on change of an individual within a role.

    Take advantage of this flagship course, examination and certification to prove your clients, peers and management, your competency in the field of Functional Safety. Success in the final examination certifies your functional safety knowledge on your personal name, adding a great value to your professional career and image.


Participant eligibility requirements

In accordance with the FS Engineer (TÜV Rheinland) Program:

  • Minimum 3 years experience in the field of functional safety
  • University degree (Master's or Bachelor's degree in Engineering) OR Equivalent engineer level responsibilities status certified by employer

Course duration

3.5 days: 3 consecutive days vocational training with student exercises, + 4 hours closed book exam in the morning of the fourth consecutive day.

Introduction to functional safety

  • Modern history of disasters
  • What is safety?
  • Legal status IEC61511
  • Overview of legal requirements
  • Layers of protection
  • Safety Instrumented System
  • Safety Integrity Level
  • Problems with safety systems
  • Safety system failures
  • What is Functional Safety? 
  • Functional Safety Standards

Management of Functional Safety

  • Lifecycle concept 61508/61511
  • Functional Safety Management
  • Competency
  • Risk evaluation and management
  • Safety Planning
  • Implementation and monitoring
  • Functional Safety Assessment
  • Functional Safety Audit
  • SIS configuration management

Planning the Safety System

  • Safety lifecycle structure/planning
  • FS management system
  • Verification & Validation plan
  • Safety Requirement Specification

 Verification & Application Program

  • Verification planning
  • Verification testing
  • Application program verification

Process Hazard & Risk Assessment

  • Hazard & Risk definition
  • Tolerable risk and ALARP
  • Risk management
  • Hazard Identification Techniques, FMEA, FTA, HAZOP
  • Hazard Analysis Techniques, ETA, dispersion modeling, bowtie
  • Hazard Analysis Techniques ETA
  • Risk Reduction Techniques, risk matrix, risk graph, 
  • Security Risk Assessment, digital mapping, Security Levels, Security Assurance Levels, Foundational Requirements

Allocation Safety Function to layers

  • Layer Of Protection Analysis LOPA
  • Typical IPL characteristics
  • LOPA working example
  • LOPA pros and cons
  • LOPA CCPS books references
  • SIF operating modes and Safety Integrity Requirements 

Safety Requirement Specifications

  • SRS general requirements
  • SIF description requirements
  • MTTR-MRT, etc
  • Application Program SRS 

SIS Design and Engineering, AP development

  • General requirements H/W
  • Safety Manual as per IEC61508
  • Hardware concepts
  • IEC61511 SIF - mode of operation
  • Safety - vs Process - HFT
  • Diagnostics - vs Proof - test 
  • IEC61508 Safe Failure Fraction
  • Architectural constraints          Route 2H - Route 1H
  • Selection of devices/field devices
  • Maintenance and testing requirements
  • Quantification of Random Failures
  • Three barriers to clear to claim SIL
  • General requirements AP
  • Application Program (AP) design
  • V-model lifecycle documentation
  • AP implementation
  • AP verification and testing
  • AP methodology and tools

Installation, Commissioning and Validation

  • Installation plan and documentation
  • Activities, procedures and techniques
  • Validation FAT - SAT

Operation and Maintenance

  • Planning operation/maintenance
  • Procedures operation/maintenance
  • Bypass - MOS
  • Proof test procedure for every SIF
  • Training for operators/maintenance personnel 


  • Modification objectives
  • Input needed
  • Change vs Modification
  • Before you start modification
  • During modification
  • After modification
  • FSA before you begin


  • Procedures, analysis and authorisation
  • SIF requirements

Wrap up

  • Summary
  • Exam preparation

Student exercises

  • With the student exercises, the participants will have the opportunity to put the learned theory into practice
  • Failure classification
  • Hazard and risk analysis (FMEA, FTA & HAZOP)
  • Selecting the appropriate SIL
  • Safety versus  HFT
  • Design a Safety Integrity Function
  • Define device level safety functions
  • Selection and comparing devices
  • Accident documentary (video)
  • Questions & Answers

Rules & regulations

  • The applicant has to attend the 3 consecutive days training course.
  • The Eligibility Requirements forms must be completed, signed and supported with the necessary documents (University degree or statement letter from employer)
  • The maximum duration of the exam is 4 hours
  • There are 85 questions:
  • 60 Multiple Choice questions to be answered by selecting A-B-C or D. Only 1 will be the most complete and correct answer. Every good answer will be 1 point. (There are no negative points for wrong answers)
  • 25 Open Questions to be answered in a written form. Every single question can score anything between 0 and 1 (There are no negative points for wrong answers)
  • The passing criteria is 75%, so you need minimum 63.75 points in able to pass the exam
  • All exams are monitored by TÜV Rheinland, which will issue the successful participants their personal certificate.

What you will need

  • A pen or pencil / eraser - both are acceptable
  • A bilingual English-.......... dictionary is allowed, but not a must

What is absolutely forbidden

  • Mobile telephone
  • Photo/video - camera or ‘any’ recording enabled devices
  • Course manual, notes or summaries


  • The retake needs to take place within max 1 calendar year from the first exam date without re-following the complete training again.
  • You are free to choose a location in one of the upcoming TinoVC trainings currently released on both the TinoVC (www.tinovc.com) & TÜV Rheinland (www.tuvasi.com) website.
  • You will need to register at least 4 weeks before the event is due in able to comply with the administration regulations.
  • After 1 calendar year from the first exam, a complete course (and fee) will be obliged again.

Price is in accordance with the FS program minimum pricing policy from TÜV Rheinland and will depend on location, please contact us for more information.

Special prices are available for in-house customized trainings.

Price includes:

  • Course material
  • Registration fees and FS Engineer (TÜV Rheinland) certificate (If requirements are fulfilled and exam passed accordingly)
  • Refreshments and Lunch (however the last day (exam day) there is no lunch foreseen as every participants is allowed to leave once he/she completed the exam)