TinoVC is an accepted course provider within the Functional Safety Program for Safety Instrumented Systems (SIS) of TÜV Rheinland. The course focuses on functional safety aspects for the process, oil & gas, petro-chemical and chemical industries according to IEC 61508 / 61511.View Details
The main objective is to provide all engineers who are not feeling competent in Functional Safety with the basic understanding principles in the so often made complex topics and jargon of Functional Safety used in the Process Industry.
The participant should have after this training the necessary information to evaluate Functional Safety certificate-flyers and documents.View Details
The main objective is to provide all engineers involved in process safety using-defining-designing-maintaining and operating safety instrumented systems the opportunity to learn the update and impact of the IEC61511:2016 functional safety standard release.
A second objective is to use this update course as a periodic competency review evidence which is a normative requirement by the IEC61511 edition 2.0. Furthermore, in case you have already obtained a FS Engineer SIS certificate or any equivalent competency review scheme before February 2016, then YOU can use this review course certificate of attendance to extend or renew your current certificate.View Details
The main objective is to provide all engineers involved in using-defining-designing-maintaining and operating SIS - safety instrumented systems for the Process Industry the opportunity to learn what to do in able to comply to the Functional Safety Management requirements from the normative requirements (IEC61511:2016 part 1, chapter 5 – 5.2 requirements)
A second objective is to understand the new edition 2.0 requirement that ‘every supplier providing products or services SHALL have a Functional Safety Management system’ according to the normative requirements (184.108.40.206 – IEC61511:2016 part 1)View Details
The main objective is to provide all engineers involved in process safety using-defining-designing-maintaining and operating safety instrumented systems the opportunity to learn the 29 specific items that a SIS-Safety Instrumented System SHALL include and describe as applicable according to the normative requirements (10.3.2 – IEC61511:2016 part 1)
A second objective is for all those engineers programming a safety PLC program, to learn what a AP-Application Program SRS SHALL be considered to describe with another 18 specific items according to the normative requirements (10.3.5 – IEC61511:2016 part 1)View Details
coming soon...View Details