Loading...

FS ENG SIS Offer (without exam and certificate)

FS ENG SIS Offer (without exam and certificate)

1.500,00 

Get Access to Our 3-Day Full FS ENG SIS Course for Only 1500 Euro! This deal includes the full course content and material but excludes the exam and certificate. Please note that this offer doesn’t allow for a delayed exam or certificate attainment. Don’t miss this chance to gain essential knowledge on FS ENG SIS at a reduced rate!

The main objective is to provide all engineers involved in safety instrumented systems with elementary and necessary knowledge about functional safety, based on the leading international functional safety standards IEC 61508 and IEC 61511. A second objective is to give anybody attending the course the opportunity to have his or her functional safety competency confirmed by the TÜV Rheinland upon successfully passing the exam.

Loading...

Description

General information

TinoVC is an accepted course provider within the Functional Safety Program for Safety Instrumented Systems (SIS) of TÜV Rheinland. The course focuses on functional safety aspects for the process, oil & gas, petro-chemical and chemical industries according to IEC 61508 / 61511.

COURSE OBJECTIVE

The main objective is to provide all engineers involved in safety instrumented systems with elementary and necessary knowledge about functional safety, based on the leading international functional safety standards IEC 61508 and IEC 61511.

WHO SHOULD ATTEND?

  • System integrators and independent consultants
  • Control and process engineers
  • Maintenance and instrumentation engineers
  • Managers of engineering departments
  • Risk, reliability, safety and quality engineers
  • Loss prevention engineers
  • Sales engineers – Sales managers – Marketing specialists for safety-products, systems and services
  • Technical staff involved in any part of SIS lifecycle that need or want to develop their competency in Functional Safety

WHY SHOULD YOU ATTEND?

IEC61511 ed2.0 released in February 2016, clearly indicates as a ‘Normative’ requirement:

  • That anybody involved in safety lifecycle activities SHALL be competent to carry out the activities for which they are accountable.
  • That a procedure SHALL be in place to manage competence of all those involved in the SIS life cycle.
  • That a periodic assessments SHALL be carried out to document the competence of individuals against the activities they are performing and on change of an individual within a role.Take advantage of this flagship course.

3 days: 3 consecutive days vocational training with student exercises

Content

INTRODUCTION TO FUNCTIONAL SAFETY

  • Modern history of disasters
  • What is safety?
  • Legal status IEC61511
  • Overview of legal requirements
  • Layers of protection
  • Safety Instrumented System
  • Safety Integrity Level
  • Problems with safety systems
  • Safety system failures
  • What is Functional Safety?
  • Functional Safety Standards

MANAGEMENT OF FUNCTIONAL SAFETY

  • Lifecycle concept 61508/61511
  • Functional Safety Management
  • Competency
  • Risk evaluation and management
  • Safety Planning
  • Implementation and monitoring
  • Functional Safety Assessment
  • Functional Safety Audit
  • SIS configuration management

PLANNING THE SAFETY SYSTEM

  • Safety lifecycle structure/planning
  • FS management system
  • Verification & Validation plan
  • Safety Requirement Specification

 VERIFICATION & APPLICATION PROGRAM

  • Verification planning
  • Verification testing
  • Application program verification

PROCESS HAZARD & RISK ASSESSMENT

  • Hazard & Risk definition
  • Tolerable risk and ALARP
  • Risk management
  • Hazard Identification Techniques, FMEA, FTA, HAZOP
  • Hazard Analysis Techniques, ETA, dispersion modeling, bowtie
  • Hazard Analysis Techniques ETA
  • Risk Reduction Techniques, risk matrix, risk graph,
  • Security Risk Assessment, digital mapping, Security Levels, Security Assurance Levels, Foundational Requirements

ALLOCATION SAFETY FUNCTION TO LAYERS

  • Layer Of Protection Analysis LOPA
  • Typical IPL characteristics
  • LOPA working example
  • LOPA pros and cons
  • LOPA CCPS books references
  • SIF operating modes and Safety Integrity Requirements

SAFETY REQUIREMENT SPECIFICATIONS

  • SRS general requirements
  • SIF description requirements
  • MTTR-MRT, etc
  • Application Program SRS

SIS DESIGN AND ENGINEERING, AP DEVELOPMENT

  • General requirements H/W
  • Safety Manual as per IEC61508
  • Hardware concepts
  • IEC61511 SIF – mode of operation
  • Safety – vs Process – HFT
  • Diagnostics – vs Proof – test
  • IEC61508 Safe Failure Fraction
  • Architectural constraints          Route 2H – Route 1H
  • Selection of devices/field devices
  • Maintenance and testing requirements
  • Quantification of Random Failures
  • Three barriers to clear to claim SIL
  • General requirements AP
  • Application Program (AP) design
  • V-model lifecycle documentation
  • AP implementation
  • AP verification and testing
  • AP methodology and tools

INSTALLATION, COMMISSIONING AND VALIDATION

  • Installation plan and documentation
  • Activities, procedures and techniques
  • Validation FAT – SAT

OPERATION AND MAINTENANCE

  • Planning operation/maintenance
  • Procedures operation/maintenance
  • Bypass – MOS
  • Proof test procedure for every SIF
  • Training for operators/maintenance personnel

MODIFICATION

  • Modification objectives
  • Input needed
  • Change vs Modification
  • Before you start modification
  • During modification
  • After modification
  • FSA before you begin

DECOMMISSIONING

  • Procedures, analysis and authorisation
  • SIF requirements

WRAP UP

  • Summary

STUDENT EXERCISES

  • With the student exercises, the participants will have the opportunity to put the learned theory into practice
  • Failure classification
  • Hazard and risk analysis (FMEA, FTA & HAZOP)
  • Selecting the appropriate SIL
  • Safety versus  HFT
  • Design a Safety Integrity Function
  • Define device level safety functions
  • Selection and comparing devices
  • Accident documentary (video)
  • Questions & Answers

Exam*

*Exclusive Online Offer: Get Access to Our 3-Day Full FS ENG SIS Course for Only 1500 Euro! This deal includes the full course content and material but excludes the exam and certificate. Please note that this offer doesn’t allow for a delayed exam or certificate attainment. Don’t miss this chance to gain essential knowledge on FS ENG SIS at a reduced rate!

Additional information

Date

22 may 2023, 15 june 2023, 26 june 2023, 24 august 2023, 25 september 2023, 23 november 2023, 11 december 2023